Parkside PHLG 2000 B1 - Manual (Page 30)

30 GB
Introduction / General safety advice for electrical power tools Introduction
Heat gun PHLG 2000 B1
For removing, reshaping, preheating,
defrosting etc.
Q Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. Further details can be found in
the operating instructions. Keep these instructions in
a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.
Q
Proper use
The heat gun is intended for the removal of paint,
for warming (e.g. heat-shrinkable sleeves) and for
reshaping and welding of plastics. It may also be
used for detaching glued connections and for de-
frosting or thawing water pipes. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. The manufacturer will not accept liability
for loss or damage arising from improper use. The
device is not intended for commercial use.
Q Features and equipment
1 Air inlet
2 ON / OFF switch & temperature and
air volume regulator
3 Nozzle
4 Protector nozzle
5 Flat nozzle
6 Reducer nozzle
7 Barbecue lighting nozzle
Q
Included items
1 Heat gun PHLG 2000 B1
1 Protector nozzle
1 Flat nozzle
1 Reducer nozzle
1 Barbecue lighting nozzle
1 Operating instructions
Q
Technical information
Nominal voltage: 230 V∼ 50 Hz
Power consumption: max. 2.000 W
Air volumes:
Setting I: ca. 300 l / min.
Setting II: ca. 500 l / min.
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Keep children away from electrical
power tools!
V~
Volt (AC) Caution – electric shock! Danger to life!
W
Watts (Effective power)
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Safety class II
Wear hearing protection, dust protec-
tion mask, protective glasses and pro-
tective gloves.
Observe caution and safety notes! Risk of fire!
Risk of explosion!
Dispose packaging and appliance in
an environmentally-friendly way!