HEIDENHAIN ND 1400 Addendum - Manual (Page 12)

12 1 Setup
1.
1
S
e
tu
p Maximum Form for Qualification
Maximum form for qualification is the maximum form error allowed
when teaching a probe tip. The qualification fails if the form error
exceeds the value set in the parameter field.
The Max form for qual parameter is located on the Probe setup page.
Extra Tab Functions
Extra tab functions are added to the Extra tab in the Display setup
screen. A description for each of the functions is provided in the table
below. The functions that are available depends on the system
configuration. Not all functions listed may be available on your system.
Refer to “Configuring the Extra tab” and “Sending data to a computer
from the Extra tab” in the User’s Guide for additional information.
Probe setup page with Max form for qual parameter
Icon Name Description
Space Inserts a blank space for separating function icons into groups.
Divider Inserts a vertical dividing line for separating function icons into groups.
Send X Sends the X value for the selected features.
When no features are selected, the X value of the DRO (if the display is in Cartesian coordinates),
or the R value of the DRO (if the display is in Polar coordinates) is sent.
Send Y Sends the Y value for the selected features.
When no features are selected, the Y value of the DRO (if the display is in Cartesian coordinates),
or the Theta value of the DRO (if the display is in Polar coordinates) is sent.