Grass Valley Switcher Products - Manual (Page 86)

86 Switcher Products — Protocols Manual
Section 2 — Editor Protocol
resents the first address, and bit 12 represents the DPM address. This
format is used with the FE Effects Address.
Data Field Format
All time data (field count) and speed data is specified to be binary data in
S15.16 format. The lower two bytes specify a fractional field value. The
topmost bit is the sign bit and the next 15 bits represent whole field values.
Note the following examples.
+1 field : 00 01 00 00
– 1 field : FF FF 00 00
+1 (unity) speed : 00 01 00 00
– 1/2 speed : FF FF 80 00
Setting the Run Time for a speed of zero is the same as sending a STOP com-
mand.
The editor is allowed to write a negative field count or to trim in a negative
direction which results in a negative field count. In either case the result is
to display a negative timecode in the menu and position the video at the 1st
Table 96. Zodiak Effects Addresses Byte Format
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PGM-PST Mix
Mix/Effects 1
Mix/Effects 2
Mix/Effects 3
DSK
Miscellaneous (MISC) 1
Miscellaneous (MISC) 2
Miscellaneous (MISC) 3
DPM