Grass Valley Switcher Products - Manual (Page 68)

68 Switcher Products — Protocols Manual
Section 2 — Editor Protocol
Kalypso Effects Addresses
Valid effects addresses used by Kalypso systems for the Auto Transition
Rate command are defined in
Table 59 .
Zodiak Effects Addresses
Valid effects addresses used by Zodiak systems for the Auto Transition
Rate command are defined in
Table 60 .
Transition Rate
Transition rates are specified in numbers of frames. To translate a transition
rate in seconds to number of frames, use the following formulae:
NTSC
Frame Rate = (transition time in seconds) x (30 frames/second)
PAL
Frame Rate = (transition time in seconds) x (25 frames/second)
Example: A four second AUTO TRAN would have a frame rate of 120
frames in the NTSC standard (4 seconds x 30 frames/second = 120 frames).
For the PAL standard, substitute 25 frames/second to arrive at frame rate
of 100 frames.
Table 59. Kalypso Effects Addresses - Auto Transition Rate Command
Effects Address Assignment
00 PGM-PST
01 Mix/Effects 1
02 Mix/Effects 2
03 Mix/Effects 3
04 PGM-PST Secondary Partition a
a New effects address assignment associated with Kalypso.
05 Mix/Effects 1 Secondary Partition
a
06 Mix/Effects 2 Secondary Partition a
07 Mix/Effects 3 Secondary Partition a
Table 60. Zodiak Effects Addresses - Auto Transition Rate Command
Effects Address Assignment
00 PGM-PST
01 Mix/Effects 1
02 Mix/Effects 2
03 Mix/Effects 3
04 DSK
a
a Function associated only with Zodiak.