Source select (c0) command, Kalypso effects addresses – Grass Valley Switcher Products User Manual

Page 55

Text mode
Original mode

Switcher Products — Protocols Manual55

Editor Commands

Source Select (C0) Command

The Source Bus command enables the editor to select any Source on a bus
specified by the effects address, and the command code. This command
includes compatibility of commands C1, C2, C3 and C4.

Kalypso Effects Addresses

Valid effects addresses used by Kalypso systems for the CO Source Bus
command are defined in

Table 36 on page 56

Table 35. Source Bus Command

Function

Byte Count

Effects Address

Command Code

Message

Source Bus

Source #