Grass Valley Switcher Products - Manual (Page 17)

Switcher Products — Protocols Manual17
Kalypso & Zodiak Contribution Tally Protocol
Source IDs
Valid source IDs used in this protocol range from 1-128. Source IDs in the
range of 93 - 128 originate within the switcher and never change. On
Kalypso systems, source IDs in the range of 1 - 92 represent external
sources, including any external processing blocks. Zodiak systems have the
same range of external source IDs, but have fewer external physical inputs.
A source value of 0 indicates the input or bus is not in use, or to indicate
that an external DVE is being used in an effects send loop. In this case, the
DVE’s contribution information is included in the ME’s contribution infor-
mation and additional tally calculations are not necessary. No further tally
can be calculated for source IDs of zero, and it should not be counted as a
primary input.
Tally is source based. Which physical inputs are used is not factored into
tally information.
Table 1 summarizes source IDs for ME reentries and internal sources. Note
that some sources are not available on some switcher models.
Table 1. Source IDs
Source ID Reentry Source ID Reentry
93 ME 1 PGM A 94 a
a Zodiak Systems do not have these sources.
ME 1 PGM B
95 a ME 1 PGM C 96 a ME 1 PGM D
97 ME 1 PVW A 98 a ME 1 PVW 2
99
b
b 2-ME Kalypso Systems do not have these sources.
ME 2 PGM A 100
a b
ME 2 PGM B
101 a b ME 2 PGM C 102 a b ME 2 PGM D
103 b ME 2 PVW A 104 a b ME 2 PVW 2
105
b c
c 2.5-ME Zodiak Systems do not have these sources.
ME 3 PGM A 106
a b
ME 3 PGM B
107 a b ME 3 PGM C 108 a b ME 3 PGM D
109
b c
ME 3 PVW A 110
a b
ME 3 PVW 2
111 Pgm-Pst PGM A 112 Pgm-Pst PGM B
113 a Pgm-Pst PGM C 114 a Pgm-Pst PGM D
115 Pgm-Pst PVW A 116 Pgm-Pst PVW 2
117 a Test Signal 118 Black
119 Background 1 120 Background 2
121 Still Store 1 122 Still Store 2
123 Still Store 3 124 Still Store 4
125
a
Still Store 5 126
a
Still Store 6
127 a Still Store 7 128 a Still Store 8