Grass Valley Vertigo XG Integration v.2.6 User Manual
Page 19
15
Vertigo XG & iTX Integration
User Manual
To configure the Vertigo XG’s Automation settings:
1 Open the Vertigo XG’s Dashboard application by selecting the Tools>Launch
Dashboard command from the Vertigo XG’s Control Panel, which should already be
open on the Vertigo XG’s desktop.
2 Select the Vertigo XG device from the Device Discovery table. If the device does not
appear in the table, perform a Device Discovery (Tools>Settings>Device Discovery).
3 With the Settings Mode still set to Simple, ensure that the Output Resolution setting is
the same as the TV Format setting in the Xplay Automation settings (
).
4 Change the Settings Mode by selecting Advanced from the drop-down list.
5 On the Hardware>Genlock page, set the Genlock settings particular to your iTX
system.
6 Click the Apply Changes button and close the Dashboard application.