Airlink ATVUSB05 - Manual (Page 7)

6
connect the other end to the Line In port of your sound card.
5. Connect one end of the power adapter to the Power Adapter port of the TV box and
connect the other end to an electrical outlet.
6. Connect the USB 2.0 connector from the TV box to an USB 2.0 port on your computer.
CHAPTER 2 INSTALLING VISION+ TV BOX DRIVER
Before installation, it is highly recommended that all background applications such as
antivirus software and system monitoring programs be disabled first.
1. When you plug in the USB 2.0 connector to the USB 2.0 port of your computer, the
Found New Hardware Wizard will appear. Click Cancel to quit the wizard and insert
the provided Installation CD.
2. The setup menu will automatically appear. Select Driver_Install to start the driver
installation.
Note: If the setup menu does not appear automatically, go to Start, Run, and type
D:\ksetup.exe
(where D is the letter of your CD-ROM drive) and click OK.
3. Click Next to install the driver for the Remote Control.