Airaid 1006 User Manual
Page 2
Instructions Revision
10.07.14
6. Double check your work. Make sure there is no foreign ma-
terial in the intake tract. Make sure all clamps, hoses, connect-
ors, nuts, and bolts are secure.
Reconnect the negative battery cable.
ECONOAID 2688 E Rose Garden Ln. Phoenix, AZ 85050 (888) 876-4676 www.ECONOAID.com
5. Reinstall the intake tube and tighten the five bolts. Recon-
nect the mass air sensor. Reconnect the crankcase breather
hose.
ECONOAID
1.
2.
3.
4.
4. Reinstall the factory bolts and tighten them in a cross pat-
tern to the manufacturer’s specifications. Before starting the
engine, open and close the throttlebody to make sure there are
no obstructions.
3. Install the ECONOAID Throttlebody Booster against the
intake manifold with the logo facing the throttlebody. Next
install the supplied gasket between the ECONOAID and the
throttlebody.
Fiber Gasket