ACTi NVR 3 - Manual (Page 2)

ADD DEVICES (continued) CREATE USERS
SET RECORDING SCHEDULE
CAMERA SETTINGS
CUSTOMIZE VIEWS
VALIDATION
Go to Live View page.
(1) On View Tool bar, click to create a new layout,
then click to enter edit mode.
(2) Select a layout style.
(3) ●To add a camera view:
Pull a device from Device List to a channel.
●To add a map view:
Select a channel and click , upload the map,
drag the lower right corner to adjust map size.
(4) On View Tool bar, click to save the view.
(5) Click to set this view as default live view.
Go to Setup page Schedule tab.
(1) Select the device on Device List.
(2) Choose recording mode: or
(3)Drag on
timetable.
(4) Click
“Apply”.
Step 6
2
Go to Setup page Users tab.
●Create a User Group
(1) Select “User Groups”, click “Add”.
(2) Enter group ID and click “Apply”.
(3) Configure user group permissions and click “Apply”.
●Create a User Account
(4) Select “Users”, click “Add”.
(5) Enter user Account, Password and select User
Group, and click “Apply”.
Step 7 Step 9
(1) To check live streaming, go to Live View page, select
certain view from View List or a camera from Device
List.
(2) To check recording, go to Playback page, select
certain view from View List or a camera from Device
List. Drag on the time bar to see the recorded video.
Step 10
● Select “Search
Devices” to auto-
search the local
network for ACTi
devices. Select your
devices and click
“Apply”.
● Select “Add Device
Manually” to add
devices cross-LAN or
WAN. Fill in the
fields Media Type,
Protocol, IP Address,
HTTP Port, Account
& Password. Click
Step 5
Go to Setup page Device tab
(1) Select the device on Device List.
(2) Enter Basic/Video/PTZ/Preset Tour tabs for settings.
Step 8
1
2
1
2
4
3
1
2
3
1
5
4
View Tool bar
5 4 1 2
3
● Select “Search
ONVIF Devices” to
auto-search the
local network for
ONVIF-compliant
devices. Fill in the
device’s credentials
then click .
Select your devices
and click “Apply”.
“Get Device Settings”
then “Apply”.