Introduction, System features, What this user guide covers – Studio Technologies 210 2008 User Manual
Page 5: System overview, Microphone input

Model 210 User Guide
Issue 4, October 2008
Studio Technologies, Inc.
Page 5
Introduction
What This User Guide Covers
This User Guide is designed to assist you
when installing, configuring, and using
the Model 210 Announcer’s Console.
Additional background technical informa-
tion is also provided. A product block dia-
gram is included at the end of this guide.
System Overview
The Model 210 Announcer’s Console is
designed to serve as the audio control
center for announcers, commentators,
and production talent. The tabletop unit is
suited for numerous applications including
on-air television sports broadcasting. The
Model 210 integrates all on-air, talkback,
and cue audio signal routing into one com-
pact system. Ease of use, flexible in con-
figuration, and sonically excellent are some
of the unit’s highlights.
The Model 210 is compatible with most
broadcast and audio system environ ments.
Standard connectors are used to interface
microphone, headphone, talkback, and IFB
signals. Whether it’s microphone switch-
ing, talkback output, or headphone cue
feed, superior audio quality is maintained
throughout. A microprocessor provides the
Model 210’s logic power, allowing exacting
control of the unit’s operation. A range of
configuration choices allow the desired op-
erating configuration to be easily selected.
While flexible, the user is presented with an
easy-to-use set of controls and indicators.
A truly next-generation product, extensive
research into the needs and desires of field
production personnel was integral to the
Model 210’s creation. While primarily tar-
geted for on-air television applications, spe-
cialized features are included to allow the
Model 210 to be used in a variety of other
audio applications. These include on-air
radio broadcasting, stadium announce-
ment, and voice-over/narration booths.
System Features
Microphone Input
A high-performance microphone
preamplifier circuit provides low-noise/
low-distortion amplification over a 20 to
60 dB gain range. The gain is adjustable
in 10 dB steps. The input is compatible
Figure 2. Model 210 back panel
Figure 1. Model 210 front panel