Progressive Turf Equipment TDR-30 - Manual (Page 29)

28
CONNECTING THE INPUT PTO SHAFT
a) Ensure that the tractor engine is shut off and the parking brake is locked.
b) Holding the PTO against the end of the tractor PTO shaft, rotate the tractor
PTO by hand until the shaft slides on slightly.
c) Slide the locking collar on the PTO backwards, releasing the locking
mechanism hold and slide the PTO on.
d) Release the locking ring and pull the PTO shaft backwards until the locking
mechanism snaps into place.
e) Push the shaft forward and backwards to ensure that this is securely locked in
place.
If the PTO shaft comes off during operation, it may cause personal injury and damage
to the PTO shaft and tractor PTO. When checking, make sure the locking collar is
locked, and that the shaft is not just jammed against the end of the tractor PTO shaft.
TRANSPORT SAFETY CHAIN
It is recommended that the safety chain provided with this mower be attached to the
towing vehicle at all times.
Install a safety chain as shown. After attaching the safety chain, make a test run to
the left and right for a short distance to check for proper adjustment. Readjust to
eliminate a loose or tight chain
.