Hitching mower to tractor, Drawbar setup – Progressive Turf Equipment TDR-30 User Manual
Page 27
26
HITCHING MOWER TO TRACTOR
Attach mower to drawbar only.
DRAWBAR SETUP
Drawbar should be adjusted so it is 14” to 15” from the centerline of the draw
pin hole to end of PTO shaft. This is critical for proper PTO shaft operation.
Adjust hitch or drawbar so mower frame is at the most level
position in relation with the ground. This will ensure
proper flotation of the wing decks.
Safety chain must always be attached to towing vehicle.
When towing mower on any roadways, lock brakes together. Use proper lighting and
marking devices according to the local regulations.
NOTE: If the three-point hitch is attached to tractor, be sure it will not contact
any part of the mower when making sharp turns. The hose support rod may have to
be bent back slightly to clear the three point hitch arms.