Progressive Turf Equipment TDR-30 - Manual (Page 22)

21
10. Align the corresponding tie rod end of the
wing with the mounting brackets and reinstall
the hardware as shown.
11. Attach the Wing Stop Chain to the upright
tab on the wing deck next to the Height
Indicator. Use existing hardware attached to
secure the chain.
LH outer wing is now ready for
installation. Repeat steps 7-11 to
mount the RH wing onto the RH
outer deck.
12. Remove the 3/8” hardware from each LH
lift pin on the LH Main Wing Deck and
slide the pin into each inside bushing as
shown.
Tie Rod
End
Lock
Washer &
Hex Nut
Springs Spacer
Wing Stop
Chain
Height
Indicator
Lift
Pin