Drive Medical Design Odyssey Mobility Scooter - Manual (Page 23)

23
INSPECTION AND MAINTENANCE
ATTENTION
1.When tread depth is below 0.5 cm it can easily lead to vehicle slippage, making braking
distances longer. Therefore replace the tires as early as possible when they are found to
have insufficient tread depth.
ATTENTION
When conducting maintenance of your vehicle, please turn the power switch to OFF and
remove the charger cords.
SUGGESTIONS
• Do not splash water directly to wash your scooter as this could lead to malfunction of the
system electrics.
• Do not use gasoline, solvents or vaporizing solution as these may deform or damage the
shrouds.
• Do not use wax.
STORAGE
Make sure the scooter is stored under the following condition:
• Ensure the seat is set in the “forward” position.
• Ensure the scooter is switched off.
SUGGESTION
Please store the scooter in a location where it is out of direct sunlight, rain, or dew. When
storing for a long time, please charge the battery to full power and then disconnect the
battery terminal. For details inquire to your dealer.
TRANSPORTING
• Switch off the power with the key before moving. Always dismount from the scooter
before moving.
• Lift the scooter by the chassis, and not by the bumpers. Lifting the scooters by the
bumper could cause damage or injury.
• For your safety, ask for help if required. You will need two people when moving or lifting
the scooter whole.