MicroLinks PRO10 - user guide - Manual (Page 21)

19
4.1 Maintenance
Please abide by the following items while storing or using the
product:
(1) Keep dry: do not place the product in a humid environment.
Dry surroundings are helpful to extend the life of the product.
(2) Avoid temperature shock: temperature shock will cause
internal condensation inside the machine, for example, take
the product into a warm room from cold environment. Please
put the machine inside the protection bag or handbag in
advance to prevent temperature shock, and avoid using the
machine in an environment with over-high/low temperature.
(3) Avoid collision and drop: the product might go wrong by
strong collision, vibration or distortion.
(4) Shut down the machine before cutting off the power supply or
removing the battery: do not forced cut off the power supply
or remove the battery.
(5) Do not make face lens against strong light or sunshine for long
time: Strong light rays might degrade sensitive elements and
generate white stain on the image.
(6) Handle SD Card and movable parts carefully: do not force
disassemble SD card or squeeze screen, connection lines of
power supply and battery cover. Avoid contacting the lens
since they are subjected to damage.
(7) Machine not in operation: please switch off power supply and
remove battery or unplug power cable, and store them in a dry
place with excellent ventilation. Do not expose the machine in
an environment lower than -5℃ or higher than 50℃.
(8) Appropriate storage: while carrying, please put the machine
inside the protection bag to prevent it from being damaged
because of collision.
4.2 Product Sizes
Sensitive
Element
2 million pixels CMOS
Lens High-sensitive Lens
Auxiliary
Source
Ultra-bright white light LED x 8
LCD 2.8” TFT Color LCD
Memory 2 G Byte SD Card
Communication USB2.0 Compatible; AV Terminal Compatible
Magnification
Optical Zoom 1x~ 10 x (continue) and 40 x; 5 x
Digital Zoom
Joint DC IN Terminal (mini USB joint)
Li-ion Battery Model: NP-120; Voltage: 3.7 V
USB Power
Supply Device
AC Transformer(Output: DC 5.0/1A Input:
AC 100-240V 50/60Hz)
Electric
Consumption
4V/360mA
Size 130(L) ×64(W) ×28 (T) mm
Weight
Host weighs around 120 grams (160 grams
including the battery)
Operation
Environment
Temperature -5℃ ~ 50℃; Humidity-lower than
85% (No Condensation)
For any change, please visit
http://www.vitiny.com to check information.
4.3 Safety Instructions
(1) As an electronic product, please do not use the machine in any