MBM Corporation TRIUMPH 5551-06 EP (99 STEP MODULE) - Manual (Page 25)

- 25 -
If the cutting quality decreases:
•
Check the cutting depth (see page 35).
•
Check the cutting stick (see page 29).
•
Replace or grind the blade (see page 25 - 35).
The blade cannot be ground if the blade
height is less than 8,2 cm / 3,23 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only
be performed by trained staff.
GB • Messer u. Schnittleistenwechsel
• Blade and cutting stick replacement •