Legrand 25DTPC - Manual

INSTALLATION INSTRUCTIONS
Wiremold Electrical Systems conform to and should
be properly grounded in compliance with require-
ments of the current National Code or codes admin-
istered by local authorities.
All electrical products may represent a possible
shock or fire hazard if improperly installed or used.
Wiremold electrical products are UL listed, made for
interior use in dry locations only and should be
installed in conformance with current local and/or the
National Electrical Code.
25DTPC
AMTPC Series
The Wiremold Company
60 Woodlawn Street, P.O. Box 332500
West Hartford, CT 06133-2500
Tel. (203) 233-6251 Fax 203-232-2062
37850 694
Components Included . . .
Communications Add-On Compartment
Two Trim Plates
One Entrance End Plate
Two Grommets
25DTPC Series
1. Remove pole entrance end plate.
2. Remove communications compartment.
3. Snap on 25DTPC to divider.
4. Snap on communications
compartment to 25DTPC.
5. Screw on entrance plate (provided).
6. Remount pole.
AMTPC Series
1. Remove pole entrance end plate.
2. Snap on AMTPC to side of communica-
tions compartment.
3. Screw on entrance end plate (provided).
4. Remount pole.
Entrance End Plate
(provided)
AMTPC
AMTPC-12
AMTPC-15
25DTPC
25DTPC-12
25DTPC-15
Steel
Communication
Communication
Power
Communication
Communication
Power
Aluminum
Communication Cables- No. of Pairs
No. of Cables
30% Fill
60% Fill
25
9
18
4
40
80
Communication Capacities