Dvd operation, Xdvdn8290 operation – Dual XDVDN8290 User Manual
Page 44
XDVDN8290
OPERATION
43
DVD Operation
Touch Area E to bring up the on-screen buttons.
Touch to fast forward or to fast reverse.
Each subsequent press of the button will change the speed from normal to 2x
to 4x to 8x to 20x and back to 1x.
Hold the
OUT
button to fast forward.
Hold the
IN
button to fast reverse.
From the remote control:
Press to fast forward.
Press to fast reverse.
Touch the Repeat button to repeat either a chapter or title. The first touch
activates Repeat Chapter mode and a second touch activates Repeat Title
mode. When either mode is active, the Repeat button will be illuminated, and
touching it a third time will disable Repeat Mode.
From the remote control:
Press
to select Repeat Chapter, Repeat Title and Repeat Off modes.
Note: The Repeat Mode can only be changed while the DVD is playing.
Touch the A
B icon once to select a start point. Touch it a second time to
select and end point. The A
B icon will illuminate and the DVD will then loop
from the start point to the end point until touched a third time.
From the remote control:
Press A
B to select a start point and stop point. Press a third time to
deactivate.
Touching PLAY/PAUSE will temporarily stop playback of the DVD. Touching it
again will resume playback,
Press the PLAY/PAUSE button to pause or resume the DVD.
From the remote control:
Press OK to temporarily stop and resume playback.
Touch Stop to stop playback. Pressing Play at this point will resume playback.
If Stop is touched a second time, then playback stops completely and will
restart from the beginning of the disc.
From the remote control:
Press to stop playback of the current chapter.
Playback Control
Repeat Mode
Repeat A->B
Play/Pause
Stop