Figure 1: connecting the ht503, Table 1: definitions of the ht503 connectors, Table 2: ht503 led definitions – Grandstream HT503 User Manual User Manual
Page 12
FIRMWARE VERSION 1.0.14.1
HT503 USER MANUAL
Page 10 of 64
HT503
Front View
HT503
Back View
Display LEDs
(Green)
RJ-45 Ports
10/100 Mbps
Reset Power
Supply
(12V)
RJ11
FXS Port
RJ11
FXO Port
FIGURE 1: CONNECTING THE HT503
The HT503 has one FXS port and one FXO port. The PHONE port next to the power supply is an FXS
port. The LINE port on the back right of the HT503 is an FXO port. Both the FXS port and the FXO port
can have a separate SIP account. This is a key feature of HT503 as it supports simultaneous calls on
both the FXS port and FXO port. Telephone calls can be originated from or terminated on the PSTN
network remotely via the FXO port.
TABLE 1: DEFINITIONS OF THE HT503 CONNECTORS
12VDC, 0.5A
Power adapter connection
LAN Port (RJ-45)
Connect the LAN port with an Ethernet cable to your PC.
WAN Port (RJ-45)
Connect the WAN port to the internal LAN network or router.
PHONE (RJ-11)
FXS port to be connected to analog phones / fax machines.
LINE (RJ-11)
FXO port should be connected to the PSTN line