DVDO VP50 PRO - Manual (Page 5)

0.3.2 Product Introduction
This section is a brief introduction with pictures of each of the models of the iScan
VP
xx
series – it is only intended as a brief “spotters guide” to iScan units. Please refer to
your product’s user’s manual or our website for more in-depth product information at
www.anchorbaytech.com/products/systems (replacement user’s manuals may be obtained
in PDF form at the same website by clicking on the “support” tab and selecting
“documentation”).
If you are trying to send a command to the iScan and it won’t accept it – make sure
you possess the model you think you have by using this spotter’s guide, and then double-
check in the command table in the following chapters, that the command is in fact
supported for the model you are attempting to use.
0.3.3 VP20 (MM604)
iScan VP20 Front
iScan VP20 Back
This model is based on our iScan VP30 product, but has one less HDMI input and no
analog RGBHV input or analog video out (RGBHV or Component). This device is
commonly found in entry-level systems where input count is not as critical as getting the
best possible processing with legacy source devices. This device may be further enabled
with our ABT102 Deinterlacing add-on card for even better processing of interlaced SD
content.
5