Delta Electronics Series DNM04 - Manual

DATASHEET
DS_DNM04SIP10_07162008D
FEATURES
Š High efficiency: 96% @ 5.0Vin, 3.3V/10A out
Š Small size and low profile: (SIP)
50.8x 13.4x 8.5 mm (2.00” x 0.53” x 0.33”)
Š Signle-in-line (SIP) packaging
Š Standard footprint
Š Voltage and resistor-based trim
Š Pre-bias startup
Š Output voltage tracking
Š No minimum load required
Š Output voltage programmable from
0.75Vdc to 3.3Vdc via external resistor
Š Fixed frequency operation
Š Input UVLO, output OTP, OCP
Š Remote ON/OFF
Š Remote sense
Š ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing facility
Š UL/cUL 60950 (US & Canada) Recognized,
and TUV (EN60950) Certified
Š CE mark meets 73/23/EEC and 93/68/EEC
directives
APPLICATIONS
Š Telecom / DataCom
Š Distributed power architectures
Š Servers and workstations
Š LAN / WAN applications
Š Data processing applications
OPTIONS
Š Negative On/Off logic
Š Tracking feature
Š SIP package
Delphi DNM, Non-Isolated Point of Load
DC/DC Power Modules: 2.8-5.5Vin, 0.75-3.3V/10A out
The Delphi Series DNM04, 2.8-5.5V input, single output, non-isolated
Point of Load DC/DC converters are the latest offering from a world
leader in power system and technology and manufacturing -- Delta
Electronics, Inc. The DNM04 series provides a programmable output
voltage from 0.75V to 3.3V using an external resistor. The DNM series
has flexible and programmable tracking and sequencing features to
enable a variety of startup voltages as well as sequencing and tracking
between power modules. This product family is available in a surface
mount or SIP package and provides up to 10A of current in an industry
standard footprint. With creative design technology and optimization of
component placement, these converters possess outstanding electrical
and thermal performance and extremely high reliability under highly
stressful operating conditions.