beautypg.com

Installing the tray kit – DR Power RapidFire 5.5 HP Subaru (July 2013 - Present) Operating Manual User Manual

Page 10

background image

10

DR

®

RAPIDFIRE™ LOG SPLITTER

4. Install the Tow Bar to the end of the Beam with four Bolts and Lock Washers

(from the product package) using two 9/16" Wrenches (Figure 3).

5. Pull the Hitch Clip and Clevis Pin from the Leg and fold it to the down

position. Align the holes and secure the Leg with the Clevis Pin and Hitch
Clip (Figure 4).

6. Remove the Jack Stand and lower the Splitter onto the Support Leg.

7. Install the front Cradle Bracket to the end of the Beam with four Bolts and

Locknuts (from the cradle package) using two 9/16" Wrenches (Figure 5).

8. For easier alignment in the following step, slightly loosen the Side Bracket

Hardware using a 9/16" Wrench (Figure 6).

9. Install the Cradles to the front and side Brackets using three Carriage Bolts

and Locknuts for each Cradle. Tighten all Cradle and Bracket hardware using
a 9/16" Wrench.

Installing The Tray Kit

Parts Supplied in Tray Kit (

Figure 7):

Item # Part

# Description

Qty

1 ............. 313631 ............ Table, Log (not shown) ......................... 1
2 ............. 321041 ............ Bolt, Carriage, 3/8-16 X 1", GR5, ZP ..... 4
3 ............. 333331 ............ Nut, Nylon Lock, Flanged, 3/8-16 ......... 4
4 ............. 150431 ............ Bolt, HHCS, 3/8-16 X 1-1/4", GR5 ........ 4
5 ............. 112411 ............ Washer, Flat, 5/16", USS, ZP ................ 4

6 ............. 180811 ............ Washer, Lock, 3/8" ................................ 4

Compare the contents of the Tray Kit with the “Parts Supplied” list above. If you
have any questions please contact us at www.DRpower.com or call 1-800-DR-
OWNER (376-9637) for assistance.

1. Support the end of the Beam with a Jack Stand or equivalent to position the

Beam parallel with the ground.

Cradles

Figure 6

Carriage Bolts
and Locknuts

Side
Bracket

Tow Bar

Figure 3

Bolts and
Lock Washers

Hitch Clip
and Clevis Pin

Figure 4

Support
Leg

Front Cradle
Bracket

Figure 5

Bolts and
Locknuts

4

Figure 7

3

2

5

6