beautypg.com

Electronic speed control— if equipped, To activate, To set at a desired speed – Dodge 2006 JR41 Stratus Sedan User Manual

Page 66

background image

NOTE:

The Traction Control System is enabled each

time the ignition switch is turned On. This will occur
even if you used the switch to turn the system off before
powering down or turning the ignition to Lock.

ELECTRONIC SPEED CONTROL— IF EQUIPPED

When engaged, this device will control the throttle op-
eration to maintain a constant vehicle speed between 30
mph (48 km/h) and 85 mph (137 km/h). The controls are
on the steering wheel.

To Activate:

Press the ON/OFF switch to turn the speed control
system ON. To turn the system OFF, press the ON/OFF
switch again. The system should be turned OFF when not
in use. The CRUISE Indicator in the instrument cluster
will light up when the Speed Control is ON.

NOTE:

You must press the ON button to activate the

system each time the engine is started.

WARNING!

Leaving the Electronic Speed Control system ON
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you aren’t using it.

To Set At A Desired Speed:

When the vehicle has reached the desired speed and the
system is ON, press and release the SET button. Release
the accelerator and the vehicle will operate at the selected
speed. The speed control is now Engaged.

Speed Control Switches

66

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

This manual is related to the following products: