Vectronics VEC-8218K - Manual (Page 8)

VEC-8218K Owner’s Manual Counter-Surveillance Monitor Kit
7
The term solder means to solder the part's leads in place, and to inspect both (or
all) solder connections for flaws or solder bridges. Nip off excess protruding
leads with a sharp pair of side cutters.
This kit has 23 fixed-value resistors. Mount these now,
starting with the smallest value and moving to the
largest. Before mounting each one, carefully bend both
leads close to the resistor body to form right-angles, as
shown.
! ! 1.#Find a 22 ohm resistor (red, red, black). Install at R6 and solder.
! ! 2.#Find a 100 ohm resistor (brown-black-brown). Install R16 and solder.
Locate two (2) 220 ohm resistors (red-red-brown).
! ! 3.#Install a 220 ohm at R1 and solder.
! ! 4.#Install a 220 ohm at R9 and solder.
Locate two (2) 470 ohm resistors (yellow-violet-brown).
! ! 5.#Install a 470 ohm at R4 and solder.
! ! 6.#Install a 470 ohm at R14 and solder.
! ! 7.#Find a 560 ohm resistor (green-blue-brown). Install at R5 and solder.
! ! 8.#Find a 1K resistor (brown-black-red). Install at R22 and solder.
! ! 9.#Find a 1.5K resistor (brown-green-red). Install at R8 and solder.
! ! 10.#Find a 4.7K resistor (yellow-violet-red). Install at R7 and solder.
Locate four (4) 10K resistors (brown-black-orange).
! ! 11.#Install a 10K at R10 and solder.
! ! 12.#Install a 10K at R11 and solder.
! ! 13.#Install a 10K at R21 and solder.
! ! 14.#Install a 10K at R23 and solder.
Locate two (2) 15K resistors (brown-green-orange).
! ! 15.#Install a 15K at R13 and solder.
! ! 16.#Install a 15K at R17 and solder.
! ! 17.#Find a 39K resistor (orange-white-orange). Install at R3 and solder.
Locate three (3) 47K resistors (yellow-violet-orange).
! ! 18.#Install a 47K at R15 and solder.
.4"