Monroe Electronics 629 - Manual

Model 629 Stereo A/V Distribution Amplifier
Installation
1. Connect your video and audio lines to be
distributed to the appropriate inputs.
2. Connect your video and audio outputs to
the appropriate loads.
3. Plug in the power supply to the jack marked
9 VAC.
4. Adjust the gain controls to supply the levels
desired for video and audio to your loads.
Operation
The 629 is an excellent quality amplifier for
video and audio signals. The levels are
adjustable from - 3 dBmV to + 3 dBmV of the
supplied inputs. The left and right audio are
independently adjusted.
Design and specifications are subject to change without notice
P/N (629/100) 050603
Specifications
Input
1 video, 1V p~p, 1 stereo audio, 50 K
Ω
0 dB
Outputs
4 video, 1Vp~p @ 75
Ω
, 4 stereo audio @ 600
Ω
Video Outputs
- 3 dBmV to + 3 dBmV at 75
Ω
Video Bandwidth
+0.5 dBmV 0 to 30 MHz, -3dB at 50 MHz
Audio Outputs
-3dBmV to +3dBmV, 600
Ω
, balanced
Audio S/N
Better than 70dBmV
Audio Bandwidth
20Hz to 20khz; +1dBmV
Audio Connections
Screw Terminals, detachable
Power Requirements
117VAC, 60Hz
Physical
2.00”H x 4.25”W x 6.50”D, 1lb.