Doremi AccessLink - Manual (Page 55)

FAL.OM.002372.DRM Page 55 of 62 Version 1.6
Doremi Labs
9.2 AccessLink Transmitter Unit LEDs
The AccessLink Transmitter unit has two status LEDs (one per channel). The channels operate
independently apart from timing synchronization, from Master to Slave.
Transmitter Channel Status LED
(each channel)
Pattern Meaning
Steady On AES3 input present, and
transmitting beacon or audio
correctly.
Brief flash every 2
seconds No AES3 input connected
(not transmitting).
Flashing once per
second. Unable to transmit; cannot find
a clear channel due to radio
band congestion.
Flashing rapidly, 5
times per second Incorrect configuration data, or
radio uncalibrated, or (on the
Slave channel) not
synchronized to the Master
channel.
Flashing very
rapidly, 10 times per
second In radio test mode.