NEMO Equipment MORPHO 1 - Manual (Page 4)

Optional Accessories
1. Spare Bladder: Add a spare welded PU bladder
with inflation/deflation valve to your repair kit for
backcountry travel. In the rare event that you need
to change your airbeam bladder, it will allow you to
quickly swap in the spare without having to check
for leaks or repair pinholes.
2. Spare Nemoid™ Foot Pump: The Nemoid™ Foot
Pump is the fastest way to inflate AirSupported™
tents, and is included with your Morpho 1P™ tent.
It inflates Morpho 1P™ in forty-five seconds and
can be stored flat in your tent’s stuff sack by simply
closing the Dump-Check Valve™ before squeezing
the air out of the pump body.
3. Integrated Pump: The Integrated Pump is the
smallest and lightest way to inflate AirSupported™
tents. The “lung-amplifying” pump features durable
welded construction, a Moisture Release Valve™, and
a Quick-Disconnect Valve for easy airbeam setup.
4. Footprint: The Footprint is a 70D abrasion-
resistant nylon fabric ground sheet perfectly sized
to fit underneath your tent. The fabric is PU coated
for waterproofness (10,000 mm). The Footprint
reduces wear and tear on your tent floor from
contact with the ground.
5. Pawprint™: The Pawprint™ is a removable liner
perfectly sized to fit inside your tent. It has the dual
function of protecting your tent floor from boots
and paws, and of adding serious comfort. The
Pawprint™ is made of a machine-washable brushed
polyester that is very soft to the touch. Place your
sleeping pads between the Pawprint™ and floor to
help them stay in place. With a clean, soft Pawprint™
under you, you might be able to save some weight
and travel with a lighter sleeping bag or blanket.