beautypg.com

Control panel 4 using the dryer 5, Start, Sort the laundry according to fabric type – Defy Appliances 600 User Manual

Page 4: Place the laundry in the drum, Close the door, Switch on by pressing the on / off button, Press the start / pause / cancel button, Cancelling a programme during a drying cycle, Set the time selection knob to freshen up, Wait for the programme to end. adding more laundry

background image

Page 4

Autodry

Premium

CLEAN FILTER

BUZZER CANCEL

PROGRAMME SELECTION KNOB

PROGRAMME PROGRESS INDICATOR

START / PAUSE CANCEL
BUTTON

ON / OFF BUTTON

Clean filter

Drying

Ready to iron

Ready to wear

End - Anti crease

Buzzer

Cancel

Start

Pause

Cancel/3sec

60min

40min

20min

Ready

to iron

Ready to

wear

Extra dry

Ready to wear

Ready to iron

Delicates

Freshen up

Timed programmes

10min

Synthetics

Cotton

On/Off

Control panel

4

Using the dryer

5

Start

Sort the laundry according to fabric type.

Place the laundry in the drum.

Close the door.

Switch on by pressing the On / Off button.

Turn the Programme Selection Knob to the
required setting.

Press the Start / Pause / Cancel button

The dryer will commence with the selected
drying cycle and the relevant indicators will
light up.


Cancelling a programme
during a drying cycle

Do not switch the dryer off. Heat soak could
damage the electronics.

Stop the programme by pressing the Start /
Pause / Cancel
button.

Press the Start / Pause / Cancel button once
more and hold it in for 3 seconds until the End
Anti crease
indicator lights up.

Set the time selection knob to Freshen up

Press the Start / Pause / Cancel button

Wait for the programme to end.


Adding more laundry

This only makes sense if the additional laundry
is added near the beginning of a programme.
Otherwise the load would comprise semi-dry
and damp laundry.

Press the Start / Pause / Cancel button.

Open the door and place the additional laundry
in the drum.

Press the Start / Pause / Cancel button.

Changing a programme
during a drying cycle

Stop the programme by pressing the Start /
Pause / Cancel
button for 3 seconds.

Select the new programme and press the Start /
Pause / Cancel
button once more.


Programme end

The drying cycle is completed when the pro-
gramme progress indicators show End-Anti
creasing
and Clean filter.

Throughout the anti creasing stage the End-
anti ceasing
indicator will flash. The pro-
gramme may then be ended at any time al-
though if left alone it will end automatically.

Press the On / Off button

Open the door and remove the laundry.




NOTE
Whenever the door is opened during a pro-
gramme, the programme will be paused automati-
cally and the Start / Pause / Cancel indictor will
flash. Close the door and press the Start / Pause /
Cancel
button for the programme to continue.

Cleaning

Clean the lint filter after every drying cycle.
( see Lint filter on page 5)

When required, clean the cabinet and control
panel using a damp soapy cloth.

Rinse and dry.

Do not use abrasive scouring powders or ag-
gressive cleaning solutions as these may dam-
age the plastic parts of the dryer.


6kg