Dynavector SuperStereo Adapter Adp2 - Manual (Page 7)

7
Specifications
Model Adp2 Analogue/digital SuperStereo processor with power
amplifier
Input impedance 300 ohms (integrated amplifier)
50 Kohms (pre-amplifier)
Input voltage overload warning indicator level
LINE IN 1.0 volts
SPEAKER 10.0 volts (= 4 ohms 25 watts)
Output voltage PROCESSOR OUT 4 .0 volts (load impedance >10K ohms)
Amplifier output 17W+17W 4 ohms load
16W+16W 6 ohms load
15W+15W 8 ohms load
Speaker impedance 4- 8 ohms
Delay time Rock----25msec, Classic----50msec
134msec/50Hz,110msec/100Hz,74msec/200Hz,
36msec/500Hz,18msec/1,000Hz
Reverberation analogue/digital feedback gain
Low pass filter fc=600Hz/-12dB/oct
none-flat
Power supply voltage AC220 – 240 volts 50/60Hz 70VA
Dimensions 430Wx63Hx230Dmm
Weight 3.5kg(approx.)
Safety compliance
Complies with EN 60065 : 1998
Country of origin Made in Japan
Guarantee 12 months (parts and labour) return to supplier
16-15 Iwamoto-cho 2-chome Chiyoda-ku Tokyo 101-0032 Japan
Phone 0081-3-3861-4341 FAX 0081-3-3862-1650
http://www.dynavector.co.jp/