200 hour – Ditch Witch SK750/SK755 User Manual
Page 64
SK750/SK755 Operator’s Manual
Service - 63
200 Hour
CMW
®
200 Hour
Change Engine Oil and Filter
Change engine oil and filter every 200 hours.
Drain oil, change filter (shown) and add 4.2 qt (4
L) of DEO at fill. See page 60.
Check Intake Air Line
Check the intake air line every 200 hours.
If the clamp is loose, apply oil to the threads and
retighten it.
If the hose appears cracked or worn, replace it.
Location
Task
Notes
Change engine oil and filter
4.2 qt (4 L) DEO
Check intake air line
1/4-1/3” (7-9 mm)
Change hydraulic filter
Check lug nut torque
88-95 ft•lb (108-129 N•m)
IMPORTANT: Use oil specified in “Engine Oil
Temperature Chart” on page 54.
NOTICE: Keep dust out of the intake air line to
prevent damage to the engine.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)