DeVilbiss JGA-510 - Manual (Page 8)

Page 8 SB-2-252-J
6/04 ©Copyright 2004, ITW Printed in U.S.A.
NIOSH-Certified, for
respiratory protection
in atmospheres not
immediately dangerous
to life.
TGC-545 (Aluminum) TLC-555
(Teflon Lined)
TSC-595 S.S. 2 Qt. Drip-Free
Suction Cup
Provides greater
degree of control
over cup fluid
pressure.
Millennium 3000
Twin Cartridge
Paint Spray Respirator
KB-555 (Aluminum) &
KB-545-SS (S/S) 2 qt. Pressure
Feed Cup With Regulator
Cup has a unique, two position
valve which permits selection of
either a drip-free or conventional
open vent mode.
JGA-444 Fluid Tube
This tube combines the
fluid and air hoses at gun
handle preventing drag-
ging hoses over work, twist-
ing line and improving
overall gun handling.
TLC-576 Aluminum Cup
(Teflon Lined) &
TSC-591Stainless Steel Cup
1 Qt. pressure feed cups.
3/8" NPS (F), cam lock lid.
Requires KK-4980 air regulator
kit.
Quick Disconnect Approved for
HVLP Guns (Air)
High Flow Ball and Ring Type
HC-4419 1/4"
NPS(F)
HC-4699
1/4" NPT(M)
HC-1166
1/4" NPT(M)
HC-4700
1/4" NPT(F)
Enables user to control
and reduce air usage at
the gun. Ideal for low
pressure spraying.
P-H-5516 Air
Adjusting Valve
HARG-510 Air
Regulator
Use to maintain nearly
constant outlet pressure
despite changes in inlet
pressure and down-
stream flow.
HD-503
SolventSaver™
Hose/Gun Cleaner
Used when abrasive
materials are sprayed
(i.e. porcelain enamel).
Use (2) JGA-52 packings
in place of JGV-463
packing.
JGA-52-K10
Leather Packings
VS-531 Low
Pressure
Strainers
QMGZ
SolventSaver™
Hose/Gun Cleaner
GTI-415 Air
Adjusting Valve
Installs into gun to en-
able user to control and
reduce air usage at the
gun. Replaces JGA-132
plug.
Spray Gun Lube
SSL-10 (2 oz.
bottle)
Compatible with all
paint materials: con-
tains no silicone or pe-
troleum distillates to
contaminate paint.
MSDS sheet available
upon request.
2 Qt Hose/Gun Cleaner
used to clean the inside
of hose, fluid passage-
ways of gun & other
paint equipment.
The VS-531 Low Pres-
sure Fluid Strainer pro-
vides a final filter for
trapping foreign par-
ticles in the paint sup-
ply.
2 Gallon galvanized tank
used to clean the inside
of hose and material
passages of the gun.
ACCESSORIES
Provides reduced
spring force (4 lbs.
verses 6 lbs.) for easier
trigger pull.
MSA-4-K10 Fluid
Needle Spring
(replaces MBD-19)
Joins any single piece
DeVilbiss air cap MBC-
368 or MSA-1 retaining
ring. Helps prevent
parts loss and provides
easier assembly.
JGA-156-K10
Spring Clip
HAF-507
Whirlwind™
In-Line Air Filter
Removes water, oil, and
debris from the air line.
This 3 piece packing
can be used in place of
Ref. (18) JGV-463, 2
piece packing.
JGA-4035-K5
Optional 3 Piece
Packings
HAV-500 or
HAV-501
Adjusting Valve
(HAV-501 SHOWN)
HAV-500 does not have
pressure gage. Use to
control air usage at gun.
42884-214-K5 3/8"
42884-215-K10 5/8"
Cleaning Brushes
These brushes are help-
ful in cleaning threads
and recesses of gun
body.
WR-103 Wrench
Contains all necessary
tip, hose and nut sizes
used on
or with gun.
Scrubs® are a pre-
moistened hand cleaner
towel for painters.
No water is needed.
29-3100 Scrubs ®
Hand Cleaner Towels
WARRANTY
This product is covered by DeVilbiss' 1 Year Limited Warranty.
DeVilbiss Worldwide Sales and Service Listing: www.devilbiss.com
ITW Industrial Finishing
DeVilbiss has authorized distributors throughout the world. For
technical assistance or the distributor nearest you, see listing below.
U.S./Canada Technical Service Office:
195 Internationale Blvd., Glendale Heights, IL 60139
Toll-Free Telephone: 1-888-992-4657 (U.S.A. and Canada only)
Toll-Free Fax: 1-800-368-8401