Digicom Pocket GPRS Power - Manual

For further information visit our
website
http://www.digicom.it
Pocket GPRS Power 22/01/2008
Remote Control GSM/GPRS Modem
Pocket GPRS Power
l GSM/GPRS signalling and monitoring System
l Device for applications of Telemetry and Remote Reading
l Perfect for application with electric meters
l Security management through CLIP
l
Programming and management via SMS, CSD and GPRS
l
Built-in TCP/IP Stack
l
Remote Setup and Upgrade via CSD and IP
l
SMS Alive and IP Alive funcions for activity test
l
RS232 Serial Interface
l
Extended power range from 9 to 30 Vdc
l
IP54 plastic case for outdoor use
l
Built-in antenna
l
Extended temperature range from -20ºC up to +70ºC
DESCRIPTION
POCKET GPRS Power has been projected to satisfy the growing needs in the
world of Industry for Remote Control and Remote Reading applications.
It’s a monitoring and signalling system based on GPRS/GSM technology.
In particular an extremely advanced system for the device management has been
developed for a complete remote management both via CSD (data call at 9.6Kbps)
and via TCP/IP packet in case of GPRS connection (more and more requested for
the advantages in these kind of applications.).
The modem integrates also the function to send SMS Alive (or the equivalent IP
packet) to test the good operation of the device (this function is necessary in this
kind of application and background).
Even for the device access security it has been implemented the management of a control list based on the CLI.
Only if the number is in the list, it is possible to guarantee the access to the device for data transfer or maintenance.
The device has been carefully projected and built in order to guarantee its operation in hard environments.
For example the SIM has been placed directly inside the device to be protected against bad weather, dust and
humidity.
Wireless M2M