Trending Accessibility PREMIUM LIBERTY CAREGIVER DOORS - Manual (Page 3)

www.TrendingAccessibility.com | 856-488-9535
Installation - Premium Liberty Caregiver Doors
3
1
Remove door from compensator
2
Select the correct curved foot for your installation:
(a) shower tray
(b) 1.18” - 1.38” wetrooms
3
Position the compensator channel .59” inboard
from the edge of the pan as shown.
4
(a) Clip the two plastic locating plates in place.
(b) Align the spirit level bubble.
5
Mark the two alignment points, repeat for the lower
fastener. DO NOT DRILL MARKINGS
6
Unclip the marking plate and align with the
previously marked points. Mark the center hole
for drilling. DO NOT DRILL OUTER POINTS
(a) (b)
shower
pan tiled fl oor
compensator channel compensator channel
.59” .59”
(a) (b)