Machine settings availability, Fieldware, Link 4.02 – TeeJet Fieldware Link User Manual
Page 33

29
98-05244-ENUS R1
Fieldware
®
Link 4.02
Machine Settings Availability
Setting
Can Be Edited In
Saved To Exported Profile In
Matrix Pro GS
v3.xx
FieldWare Link
Matrix Pro GS
v3.xx
FieldWare Link
Implement
–
Machine Type
GPS Antenna Height
Implement Type
Symmetric Implement Layout
Implement Offset Distance
Implement Offset Direction
Number of Implement Sections
Guidance Width
Application/Working Width
Applied Area Alarm
Retained From
Matrix Pro GS
–
Straight
Mode
Boom Offset Direction
Antenna to Boom Distance
Overlap
Delay On/Off Times
Spreader
Mode
Setup Type: TeeJet
Antenna to Disks Distance
Overlap
Delay On/Off Times
Spread Offset Distance
Section Offsets
Section Lengths
Setup Type: OEM
Antenna to Disks Distance
Start/Stop Distance
Section Start/Stop Offsets
Staggered
Mode
Section 1 Offset Direction
Antenna to Section 1 Distance
Overlap
Delay On/Off Times
Section Offsets
Application
– Machine Settings
Product
AutoSteer
– Enabled/Disabled
Retained From
Matrix Pro GS
– Valve Setup
Valve Type
Valve Frequency
Minimum Duty Cycle Left/Right
Maximum Duty Cycle
Retained From
Matrix Pro GS
– Steering
Settings
Coarse Steering Adjustment
Fine Steering Adjustment
Deadband
Lookahead
Retained From
Matrix Pro GS
– Valve Test
Retained From
Matrix Pro GS
– Valve Diagnostics
Retained From
Matrix Pro GS
– Options
Steering Wheel Sensor
Retained From
Matrix Pro GS
–
Steering
Angle
Sensor
Enable
Sensor Calibration
On Line Calibration
Retained From
Matrix Pro GS
Tilt Correction – Enabled/Disabled
Field Level
Retained From
Matrix Pro GS