StarTech.com DRW150SATBK - Manual (Page 5)

Instruction Manual
2
Installation
This section will guide you through the installation of your Mobile Rack Drawer. Please
read through the instructions carefully and complete each step in the order listed.
Installing the Hard Drive
NOTE: Before installing the hard drive in the case, make sure that you have properly
configured your hard drive according to the hard drive manufacturer’s specifications.
1. Remove the caddy from the bay by lifting the handle and sliding the caddy out of
the bay.
2. Remove the top panel from the caddy by pressing the cover release button and
slide the cover towards the back of the caddy.
3. Gently place the hard drive in the caddy, making sure that the screw holes on the
bottom of the hard drive line up with the holes in the caddy. Use the provided
screws to secure the hard drive.
4. Replace the top panel of the caddy.
Installing the Drive Bay in the PC
1. Make sure that your system is unplugged and you are grounded.
2. Remove the side covers from your PC and remove the front cover from an available
5.25” drive bay (see your computer’s user manual for details, if necessary).