Menu descriptions, Common settings – Canon PC1270D User Manual
Page 72
9-2
■
Menu Descriptions
• The default settings and selectable settings vary depending on the current country selection. The values shown here are average values.
Print the USER’S DATA LIST to check the current settings. (
→
p. 2-6)
COMMON SETTINGS
Name
Descriptions
DEFAULT SETTINGS
Selects which mode standby display appears in the LCD when the
power cord is connected, or the
AUTO CLEAR
function activates.
COPY
The copy mode is selected.
FAX
The fax mode is selected.
SW AFTER AUTO CLR
Selects whether the machine switches to the mode you set in
DEFAULT SETTINGS
after the
AUTO CLEAR
function activates.
DEFAULT MODE
The machine automatically switches to the mode you set in
DEFAULT SETTINGS
after the
AUTO CLEAR
function activates.
CURRENT MODE
The machine does not automatically switch to the mode you set in
DEFAULT SETTINGS
even after the
AUTO CLEAR
function
activates.
VOLUME CONTROL
Adjusts the volume of the machine.
1.KEYPAD VOLUME
Adjusts the keypad volume.
ON
1
to
3
OFF
The volume is turned off.
2.ALARM VOLUME
Adjusts the alarm volume.
ON
1
to
3
OFF
The volume is turned off.
3.TX DONE TONE
Adjusts the volume of the done tone sounded when the machine has
finished sending faxes.
ON
1
to
3
ERROR ONLY
1
to
3
OFF
The volume is turned off.
4.RX DONE TONE
Adjusts the volume of the done tone sounded when the machine has
finished receiving faxes.
ON
1
to
3
ERROR ONLY
1
to
3
OFF
The volume is turned off.
5.PRINTING END TONE
Adjusts the volume of the done tone sounded when the machine has
finished printing.
ON
1
to
3
ERROR ONLY
1
to
3
OFF
The volume is turned off.
SB_PC1270D_FG_EN.book Page 2 Monday, February 18, 2002 12:20 PM