Canon PC1270D User Manual

Page 42

4-10

Press

Start

• After the scanning is finished, the machine starts to dial the number.
• The machine will first send the document to the one-touch speed dialling

destinations, then the coded speed dialling destinations, and finally to the
destination dialled using regular dialling.

• If you prefer the machine never to scan a document automatically after a few

seconds, disable the

TIME OUT

setting. (

→

p. 9-6)

• To cancel sending, press

Stop/Reset

then press

(–)

. Sending to all

destinations specified in step 3 will be cancelled. You cannot cancel just one
destination.
After cancelling, the machine will print a MULTI TX/RX REPORT. (

→

p. 7-4)

• If a number is busy, the machine will continue sending to the other destinations and

then redial the number that was busy.

• If the machine’s memory becomes full while scanning your document,

MEMORY

FULL

will appear in the LCD and the document being scanned stops in the ADF.

Press

to make the document come out automatically. If this happens, divide the

documents into several sections and send each section separately.

▲

SB_PC1270D_FG_EN.book Page 10 Monday, February 18, 2002 12:20 PM