Canon LV-7215 - Manual (Page 22)

22
Basic Operation
Press the MENU button to display the On-Screen Menu
(Menu bar). A red frame is a pointer.
Move the pointer (red frame) to the Menu icon that you want
to select by pressing the Point Left/Right button.
Adjust the item data by pressing the Point Left/Right button.
Refer to the following pages for details of respective
adjustments.
Press the Point Down button and move the pointer (red
frame or red arrow) to the item that you want to adjust, and
then press the SET button to show the item data.
1
2
4
3
You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
INPUT
MENU
KEY
STONE
SET
VOL VOL
+ -
Top Control
Menu bar Pointer
(red frame)
Menu icon
Item data
Press the Point Left/Right but-
tons to adjust value.
SET
button
Pointer (red frame)
Press the Point Down but-
ton to move the pointer.
Item
SET button
POINT button
Remote Control
MENU button
On-Screen Menu
MENU button
SET button
POINT button
(outer ring)
On-Screen Menu
Quit item closes this menu.
To close this menu, select Quit. To clear the On-Screen
Menu, press the MENU button on the top control or on the
remote control unit. 5