Jaypro Sports FBGP-820AX - Manual (Page 3)

WWW.JAYPRO.COM Page 3 11/1/13
 Wrench Set
 Level, 3’ minimum
 100-foot tape measure
 Electric Drill
o Drill Bits: 5/16“, 1/2", and 5/8” bits
 Rubber mallet
The following equipment is optional, but strongly recommended:
 17/32”, 21/32”, and 11/16” transfer punches (highly recommended)
 3/16”, 3/8” drill bits to pilot holes (highly recommended)
 Heavy grease or white lithium grease
 Antiseize Lubricant
 Baling wire (if using rebar)
 (6), 54-inch lengths of 5/8-inch rebar
4 Check Components
Goal posts are sold in pairs. Inspect your goal post shipment and ensure you received
these parts:
Parts List
2 Ground sleeves (absent for permanent installations)
*Verify that you have the correct style ground sleeve (see Figure 3)
2 Goosenecks
2 Crossbars
4 Twenty foot uprights
4 Upright end fittings
4 Wind socks
Yellow spray paint
Check Figure 1 to confirm that your Goal Post has shipped with all hardware. If any
hardware or components are missing, contact the Jaypro Sports customer support
team, Monday through Friday, 8:00 A.M. to 5:00 P.M. Eastern Time at 1–800–243–
0533 for replacements.
Optional Height Adjuster Mechanism
If ordered, you will receive:
2 Height adjusters Figure 2