One-touch turn signal, Reverse tilt door mirrors – HONDA 2014 Crosstour (EX & EX-L) - Technology Reference Guide User Manual
Page 7
10
11
How It Works
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signal lever up
or down for a three-blink sequence.
• For a continuous signal, push the
lever up or down until it locks into
place.
How It Works
DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver’s seat and outside mirror positions into memory for each corresponding
keyless remote transmitter (1 or 2).
Available on EX-L.
1. Turn on the vehicle. Make sure the
shift lever is in Park (P).
3. Press SET. You will hear a beep.
2. Adjust the seat and outside mirrors
to your preferred position.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
Note: Once set, stored positions can be recalled by pressing one of the memory
buttons (1 or 2) on the door.
REVERSE TILT DOOR MIRRORS
When you shift into Reverse (R), you can tilt either outside door mirror down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
Available
on
EX-L.
How It Works
• To tilt the driver’s door
mirror, move the mirror
selector switch to the
left (L) position.
• To tilt the passenger’s
door mirror, move the
mirror selector switch
to the right (R)
position.
• To turn the feature off,
move the switch to the
middle position.
14 Crosstour TRG_EX EXL_ATG_NEW STYLE 9/5/2013 2:26 PM Page 7