Heckler&Koch VP9 User Manual

Page 16

FLUSH FITTING INSERTS FOR THE VP9 SLIDE

The charging supports on the rear of the VP9 slide can be replaced with flush fitting

inserts. To do so, the rear sight must be removed from the dovetail notch. With the rear

sight removed, the charging supports can then be slid upward out of the slide and the

flush fitting inserts installed in their place. The rear sight should then be replaced in the

slide dovetail. Although this modification can be made by the user/operator, it is strongly

recommended that only an HK certified armorer do so.

Figure 37 — Rear sight must be removed

to replace charging supports

Figure 38 — Installing flush fitting inserts

MAGAzINE LOADER

An HK pistol magazine loader is also available as an accessory. The magazine loader (HK

article number 217 830 ) makes loading of all VP9 magazines easier and more convenient.

Figure 39 — HK magazine loader for the VP9

Figure 40 — Using the HK magazine loader

For a complete list of accessories that fit the VP9 pistol, contact HK Customer Service.

CAUTION: Improperly de signed or in stalled ac ces so ries may re sult in dam age to the

rail system and/or the pistol. Such dam age is not cov ered under warranty. Be certain

to use only HK approved accessories and follow in stal la tion and pre cau tions care ful ly.

NOTE: If after reviewing this manual you still have ques tions, please contact HK

Customer Service at 706-568-1906 or by email: [email protected].