Futaba 4PL 2.4GHz FHSS - Manual (Page 43)

Move the cursor to the charac-
ter you want to change by (UP)
or (DN) button.
Select the character by (+) or (-)
button.
CT
Select
MODEL NAME Model name
(MODEL RX screen) (MDL NAME screen)
Move the cursor to RES<+/-
> and press the (+) and (-)
buttons simultaneously for ap-
proximately 1 second.
43
Fu
n
c
tio
n
Model / Receiver Type / Servo Response Mode "MODEL RX"
Setting the menu name
Model name "MDL NAME"
A model name (up to 10 characters) can be registered for each model. Letters, symbols,
and numbers can be used.
Model name input screen display
The model name input screen can be dis-
played by referring to P38 and displaying
the MODEL RX menu and selecting MDL
NAME by (UP) or (DN) button on the MOD-
EL RX menu screen and pressing the (CT)
button.
1
(Move the cursor to the character you want
to change.)
Select the model name character you want
to set or change by moving the cursor by
(UP) or (DN) button. The selected character
blinks.
2
(Selection of character to be used)
The character is decided when selected by
(+) or (-) button.
Also move the cursor to "RES<+/->" by (UP)
or (DN) button and press the (+) and (-)
buttons simultaneously for approximately 1
second. A beeping sound is generated and
the model name is initialized to the factory
setting.
3
When ending, return to the menu screen by pressing the (CT)
button.