Futaba 4GWD - Manual (Page 26)

27
Functions
Servo Reverse / REV
This function reverses the direction of operation of the servos related to transmitter
steering, throttle, channel 3 and shift operation.
However, when the position set by trim or subtrim shifts from the center, the center
becomes the opposite side.
Servo Reverse Function Setting
(Preparation)
- Preselect setup channel "C1", "C2", "C3" or "C4".
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo operation direction.
(Each channel can be set similarly.)
2
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
(Initial screen)
Press "SEL" key to select the
desired function screen.
Calling the setup screen
(Setup screen)
Press "CH" key to select the next set-
up screen.
[Setup Item]
REV-C1 : Steering
REV-C2 : Throttle
REV-C3 : Channel 3
REV-C4 : Shift [Servo direction]
OFF: Normal side
ON: Reverse side