Canon LV-7345 - Manual (Page 11)

RGB IN
DIGITAL
COMPUTER
AUDIO IN
S – VIDEO IN
AUDIO
IN
VIDEO IN
AUDIO
OUT
RGB IN ANALOG
MCI
RESET
CONTROL PORT
Y Pb/Cb Pr/Cr R L
R L
11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
When controlling the computer
with Remote Control Unit of
this projector, connect the
mouse port of your personal
computer to this connector.
(Refer to P13.)
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to P12.)
Connect the audio output
(stereo) from computer to
this jack. (Refer to P13.)
Connect the audio output
from video equipment to
these jacks.
(Refer to P12.)
● When the audio output
is monaural, connect it
to L (mono) jack.
CONTROL PORT CONNECTOR
COMPUTER AUDIO
INPUT JACK
AUDIO INPUT JACKS VIDEO INPUT JACKS S-VIDEO INPUT JACK
Connect the composite video
output from video equipment
to Y jack or connect the
component video outputs to
Y, Pb/Cb and Pr/Cr jacks.
(Refer to P12.)
Connect the computer
(digital/analog) output to
one of these terminals.
(Refer to P13.)
RGB INPUT TERMINALS
(DIGITAL/ANALOG)
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on
pages 11 to 13 and connect properly.
Connect an external
audio amplifier to these
jacks.
(Refer to P12, 13.)
AUDIO OUTPUT JACKS
This projector uses a micro
processor to control this unit,
and occasionally, this micro
processor may malfunction
and need to be reset. This
can be done by pressing
RESET button with a pen,
which will shut down and
restart the unit. Do not use
RESET function excessively.
RESET BUTTON
When controlling the computer
with Remote Control Unit of this
projector, connect USB port of
your personal computer to this
connector. (Refer to P13.)
USB CONNECTOR (Series B)
✽ Do not press this button. This button
is used for our optional accessories.