Chrysler 2015 300 - User Guide - Manual (Page 125)

DRIVER INFORMATION DISPLAY (DID)
The DID features a driver interactive display
that is located in the instrument cluster. Push-
ing the controls on the left side of the steering
wheel allows the driver to select vehicle infor-
mation and Personal Settings. For additional
information, refer to “Programmable Features”
in this guide.
• Push the UP arrow
button to scroll
upward through the main menus (Speed-
ometer, Vehicle Info, Driver Assist, Fuel
Economy, Trip, Audio, Messages, Screen
Setup) and sub menus.
• Push the DOWN arrow button to scroll
downward through the main menus and sub
menus.
• Push the RIGHT arrow button for ac-
cess to main menus, sub menus or to select a personal setting in the setup menu. Push and hold
the RIGHT arrow button for two seconds to reset features.
• Push the LEFT/BACK arrow button to scroll back to a previous menu or sub menu.
• Push the OK button to access/select the information screens or submenu screens of a main
menu item. Push and hold the OK arrow button for two seconds to reset displayed/selected
features that can be reset.
Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually. When
the vehicle is new, the compass may appear erratic, and the cluster will display dashes (- -) until
the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an area free
from large metal or metallic objects) until the dashes (- -) displayed in the DID turns off. The
compass will now function normally.
Driver Information Display (DID) Controls
E L E C T R O N I C S
123