Remote control, Inserting the battery, English – Clarion DB265MP User Manual

Page 7

DB265MP

280-8303-00

English

7. REMOTE CONTROL

If you buy the RCB-176-600 sold separately, you can enjoy the use of the Remote Control function.

CR202

[SRC]

[BND]

[

]

[ ], [ ]

[MUTE]

[ISR]

[SCN]

[

], [ ]

[DISP]

[RDM]

[RPT]

Inserting the Battery

1 Turn over the remote control unit and slide the cover

in the direction indicated by the arrow in the
illustration.

2 Insert the battery (CR2025) into the insertion guides,

with the printed side (+) facing upwards.

3 Press the battery in the direction indicated by the

arrow so that it slides into the compartment.

4 Replace the cover and slide in until it clicks into place.

Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:

• Use only the designated battery.

• When replacing the battery, insert properly, with +/–

polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire or

water. Do not attempt to disassemble the battery.

• Dispose of used batteries properly.

Insertion guide

Signal transmitter