beautypg.com

Removing & replacing oven racks, Arranging oven racks, Types of oven racks – Kenmore 790.9434 User Manual

Page 7: Baking layer cakes with 1 or 2 oven racks, Air circulation in the oven, Before setting oven controls, Oven vent location

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Before Setting Oven Controls

OVEN VENT

Oven Vent Location

The oven vent is located under the left side of the control panel
(See Fig. 1). When the oven is on, warm air passes through the vent.
This venting is necessary for proper air circulation in the oven and good
baking results. DO NOT BLOCK OVEN VENT.

Removing & Replacing Oven Racks

To remove, pull the rack forward until it stops. Lift upfront of rackand slide
out. To replace, fit the rack onto the guides on the oven walls. Tiitthefront
of the rack upward and slide the rack back into place.

■ 1 pi

Н2н

4M

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL

(PRIOR TO OPERATING THE OVEN).

Always use oven mitts when

using the oven.

For models with a visible Bake Element (Refer to Fig. 2)
For models with a hidden Bake Element* (Refer to Fig. 3)

Oven with visible

Bake Element - Fig. 2

Types of Oven Racks

Your range may be equipped with
one or more of the oven rack types
shown; Flat Rack, Handle Rack
and Offset Rack. To maximize
cooking space the Offset rack can be
used in the lowest rack position to
roast large cuts of meat and poultry.

Food

Rack Position

Rack Position*

Broiling hamburgers & steaks

1

1

Broiling meats, chicken or fish

1, 2 or 3

1, 2, or3

Cookies, cakes, pies, biscuits
& Muffins

3 or 4

3 or 4

Frozen pies, angel food cake,
yeast, bread, casseroles, small
cuts of meat or poultry

5 or 6

6

Turkey, roast or ham

6

7

Oven with hidden

Bake Element - Fig. 3*

Flat

Oven Rack

Handle

Oven Rack

Offset

Oven Rack

Baking Layer Cakes with 1 or 2 Oven Racks

For best results when baking cakes using 2 oven racks, place cookware on rack positions 2 & 5 (for models with a visible bake

element). For models with a hidden bake element place oven racks in positions 3 (Flat rack) & 6 with the Offset rack if equipped
(Refer to Fig. 4).

For best results when using a single oven rack, place cookware on rack position 4 (for all models - Refer to Fig. 5).

Air Circulation in the Oven

For best air circulation and baking

results allow 2-4" (5-10 cm) around
the cookware for proper air circulation
and be sure pansand cookware do not
touch each other, the oven door, sides
or back of the oven cavity. The hot air
must be able to circulate around the

|

pans and cookware in the oven for
even heat to reach around the food.

pig^T”"" ~~~ ^ ™

Fig. 5

This manual is related to the following products: