Cleaning exterior, Removing clogs, Cleaning exterior removing clogs – Kenmore ASPIRADORA 116.34722 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING EXTERIOR
Unplug power cord from wall outlet. Clean
exterior using a ciean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water and wrung dry.
DO NOT drip water on cleaner and wipe
dry after cleaning.
DO NOT clean tools in dishwasher or
clothes washer. Wash tools in warm soapy
water, rinse and air dry.
DO NOT use tools if they are wet.
REMOVING CLOGS
The hose located on the vacuum cleaner
carries the dirt from the nozzle up to the
dustbin. If the hose should become
clogged:
Unplug vacuum. Remove hose coupling
and check hose coupling and hose inlet for
clogs. Check suction inlet and secondary
filter screen for clogs.
Disconnect wand from connector pipe and
nozzle hose, check the wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in and
out to remove clog. If clog still exists, turn
vacuum cleaner OFF and UNPLUG
POWER CORD. Turn vacuum over and
inspect agitator area for clogs.
17