When moving the washer/dryer, Wlimpim), If washer/dryer does not operate – Whirlpool Thin Twin User Manual

Page 7: If you need assistance

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If washer/dryer

does not operate...

• Check that the circuit breaker is not

tripped or the house fuse blown.

• Check that power supply cord is piugged

into wall receptacle.

• Check that washer lid or dryer door is

ciosed.

• Check that controls are set in a running or

"ON" position.

• Check that dryer "START" button has been

firmly pushed.

If you need

assistance...

Call your dealer or local authorized service
company.

When you caii, you wili need the
washer/dryer modei number and seriai
number. Both numbers can be found on the
modei/seriai rating piate iocated behind the
dryer door on the dryer door well.

When moving the
washer/dryer...

• Disconnect the power supply cord. Tape

power supply cord securely to

washer/dryer.

• Tape the dryer drum to the front panel.

Tape the lint screen in place. Tape the
dryer door closed.

• Wedge a blanket between the tub ring

and cabinet top to restrict washer tub
movement.

• Turn front leveling iegs aii the way in.

WliMpiM)!

^ ^^CORPORATION

Part No. 3397516

Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022

Printed on recycled paper.

10% post consumer waste/

50% recovered materials.

Printed in U.S.A.